| |
MICT SURFACE APPLIED SLURRIES |
|
| |
 |
Multiguard In-depth Type A (MITA) |
|
| |
MITA is a state-of-the-art premium grade and an unique chemical treatment designed to waterproof and protect concrete from water penetration through pores and capillaries. As the most chemically active of Hydronil’s therapies, MITA was specifically designed to be a surface applied treatment that penetrates into fresh or existing concrete to provide a permanent in-depth waterproofing solution. It has capacity to withstand more than 550 ft water head from both negative and positive side of treatment.
>> read more |
|
| |
datasheet (pdf) application video |
|
| |
|
Multiguard In-depth Type B (MITB) |
|
| |
MITB is chemically similar to MITA only less potent and is purposely designed to be a surface applied treatment that penetrates into concrete for an in-depth waterproofing solution. It is used as a crystalline waterproofing product where hydrostatic pressure is minor or not relevant. MITB also makes a cost effective alternative as a second coat for MITA. Hydronil’s MITB works within the concrete's substrate to react with un-hydrated cement particles and water to grow crystals within the concrete mass.
>> read more
|
|
| |
datasheet (pdf) application video |
|
|
| |
| |
MICT CONCRETE ADDITIVE |
|
| |
|
Multiguard In-depth Premix (MIP) |
|
| |
MIP is designed to add directly into green/fresh concrete either at the batch plant or directly into ready mix trucks at the site. It is based on same technology of MICT which enhances concrete by effectively waterproofing it and reducing the shrinkage cracks. This provides a cost effective solution to membrane systems while increasing concrete's durability. It works to continuously prevent moisture from penetrating through the concrete by creating a catalytic chemical reaction within the pores and capillaries to enhance the hydration process of the cement component within the concrete.
>> read more
|
|
| |
datasheet (pdf) application video |
|
|
| |
| |
MICT JOINT DESIGN AND CRACK REPAIR SYSTEMS |
|
| |
| |
Hydronil´s MICT Joint Design and Crack Repair Systems utilize a combination of MICT systems to create an effective and permanent solution to water penetration through non-moving joints and non-moving cracks.
|
|
| |
|
Multiguard In-depth Mortar (MIM) |
|
| |
MIM is a fast setting, very dense cementitious non-shrink grout for repairing joints and cracks. It is based on MICT technology to offer long term protection to the substrate.
>> read more |
|
| |
datasheet (pdf) application video |
|
| |
|
PREMIX RM |
|
| |
Premix RM is a ready to use repair mortar for repairing honey-combed concrete. Because of its advanced formulation, Premix RM treated surface remains durable for the life of structure. The product needs only addition of water to apply to the affected surface.
>> read more
|
|
| |
datasheet (pdf) |
|
|
| |
| |
MICT PLUGGING SYSTEMS |
|
| |
|
PLUGFAST |
|
| |
Hydronil’s PlugFast is a dark brown, non-shrinking crystalline grout formulated to immediately stop flowing water through concrete cracks and holes in seconds. Using an advanced formulation based on MICT crystalline treatment system, PlugFast hardens in excess of the concrete into which it has been placed to ensure you repairs stay where they are placed. PlugFast becomes very important where concrete surface has flowing water, and it needs waterproofing under such conditions.
>> read more
|
|
| |
datasheet (pdf) |
|
